3YJ6/8 STATIC ROAD ROLLER

Series

3YJ6/8 STATIC ROAD ROLLER

Works Condition

Road Construction

Capacity

6/8Ton

Applications
These rollers are widely used for the final compacting of highway, railway, municipal works, parking ground, industrial ground and square construction works. As well as for paving of gravel, macadam, asphalt and asphalt concrete road face, it is also capable of compacting the road base.
Main Features
The hydraulic steering system assures easy manipulation.
It has low center of gravity, good stability & large climbing ability.
The disk brake and change-over clutch are reliable and durable.
The comfortable seat and excellent visibility are its rational design.
Service Brake: Hydrostatic; Parking Brake: Mechanical.
Pressurized water sprinkler system on both front and rear drums with water spray on/off switch and corrosion free water tank.
Wheel scrapers and electrical lighting arrangements on front & rear
Speed control lever with neutral start switch, secondary/parking brake switch, engine start/run/stop switch.
Steel canopy over driver’s seat, also high quality rubber cloth will be provided to protect heat.

Operating weights 6000 (without Ballast),8000 (with Ballast)
Front Drum Dimension φ1070×1500 mm
Back Drum Dimension φ1070×500 mm
 Wheel base  2200 mm
 Ground clearance  270mm
Turning radius 4700mm
 Forward moving speed I II III  2.7/6.0/13.2 km/hr
 Back moving speed I II  2.7/6.0 km/hr
 Grade ability  20 %
 Static linear pressure
 Front Drum 170(without Ballast), 240 (with Ballast)N/cm
 Back drum 352(without Ballast), 470 (with Ballast)N/cm
 Engine brand  Dongfeng Cummins
 Engine model  4BTA3.9-C80
 Rated power  60 KW
 Rated speed  2200 rpm
 Overall dimension(L*W*H)  4210x1900x2770 mm